3Com Corporation
 NetWare DOS ODI Installation Notes


 Novell Netware 4.X
 ------------------


 Installing the 3Com Driver using the NetWare 4.X Installation 
 Program.  This procedure describes how to install the 3Com 
 network driver using the NetWare 4.X installation diskettes.
 Using the NetWare installer adds windows client support, 
 provides NetWare User Tools for printing, and allows you to 
 log in and out using Windows.

 1.  Insert the NetWare diskette WSDOS1 in your floppy drive.
 2.  Type Install
 3.  Accept the defaults for the first four options.
 4.  Select Driver Option.
     The driver list is displayed.
 5.  Scroll through the list and select "Others" 
 6.  Remove the NetWare diskette from the floppy drive.
 7.  Insert the EtherDisk in the floppy drive.
 8.  Press Return.  The title "3Com EtherLink III PC Card 
     Adapter v1.1" is displayed on the screen. 
 9.  Press Return to select the network board.
 10. Press [F10] to install the driver.
 11. Press Return and follow NetWare instructions to complete
     the installation.
 12. Reboot the PC to load the new driver.
     This completes the installation.



Full-Duplex Operation
=====================
The DOS ODI NetWare driver supports full-duplex operation (that
is, sending and receiving data simultaneously).  WARNING: You
MUST be connected to a switched full-duplex Ethernet hub to use
this feature (this feature disables collision detection).  

To enable this feature add the ODI Keyword "FULL DUPLEX" to 
the NET.CFG file.

 
=========================================================
                                 
                                 
 (%VER ODI - Novell Netware v1.0c)